Using it without any energy-saving measures naturally cannot reflect the energy-saving aspect. To achieve energy-saving goals, one can start by improving the structure of the electric heater, adjusting its parameters, etc. The effect after changes will be obvious.
A large number of users, when using air electric heaters, only insulate the outlet pipes of the electric heater, but do not apply any insulation treatment to the surface of the electric heater itself. However, data proves that adding an insulation layer on the surface of the air electric heater can reduce a considerable amount of energy consumption.
Therefore, we remind all air electric heater users that when adding insulation to the equipment pipes, do not forget to add insulation to the air electric heater itself. In long-term operation, the energy savings are very significant, reducing the operating cost of the equipment.
Generally, the power of an air electric heater is determined based on the air volume and temperature rise. Therefore, under the premise that the air volume and temperature rise have met the requirements, it is not advisable to use excessive air volume or excessive temperature rise, otherwise it may directly lead to excessive power of the heater and increase energy consumption. Therefore, reasonable design and determination of appropriate parameters are very critical.
When the air to be heated flows through the inside of the air electric heater, pressure loss occurs, and the greater the pressure loss, the greater the energy consumption of the fan. Therefore, the structure of the air electric heater itself should be improved to minimize the pressure loss, thereby contributing to the realization of energy saving.
