Special Electric Heater for Oil and Gas Fields
Product Structure Features of Oil Field Heater: This product is composed of main materials and components such as metal tubular heating elements, stainless steel (iron) protective cover, and temperature controller. Its characteristics are: no noise, no smoke, no odor during heating, uniform temperature and no dry heat feeling. Low thermal load, long service life, no maintenance and repair requirements, high mechanical strength, easy installation, beautiful appearance, and safe use.
2. Technical Standards
1.Thermal Equivalent (1KW):860 kcal/kWh
2.Enclosed Heating Standard Usable Space:10m3/kW
3.Temperature Control Range:0～55℃
4.Cold Insulation Resistance:≥10MΩ
5.****Control Current:15A
6.Power Frequency Impulse Voltage2kV Duration1min
7.Continuous Working Time:≥5000 Hours
8. Explosion-proof grade is ExdIIBT4, ExdIIBT6, ExdIICT6
3. Installation and Usage Methods
1.The four corners of the heater are equipped with fixed mounting holes, each corner has three holes, any two holes can be used. First install the heater on the mounting bracket, then fix it on the wall. The installation position should keep a distance of10 cm from any wall and20 cm above the ground to prevent wall aging due to long-term use.
2.After connecting the power supply, turn the temperature knob to the desired temperature, and the corresponding signal light will indicate.
4. Precautions
1.Warning: To avoid overheating, do not cover the heater.
2.If the power cord is damaged, to avoid danger, it must be repaired by the manufacturer.
3.
